Material Samples
All our samples are available in roll or sheet form.
From all materials, we can manufacture forms of strip, washer gaskets, diaphragms, pads, seals, plain and adhesive-backed. The adhesive backing is protected by an easily removable siliconized paper.
All samples shown are a selection of our most popular materials. Many others are available, please ask our technical support team for assistance where necessary.
Expanded Closed Cell E.P.D.M Cell Sponge – Product Code CC40
Average density 30Kgm3
Temperature range: -80c – +80c
Colour: Black or White
Applications: Gasket and strip to withstand weather
Open Cell Natural Industrial Sponge Rubber – Product Code CC60
Average density 412Kgm3
Specification D1056-85 RO12 1A2
Temperature range: -40c – +70c
Applications: Gaskets, Rolls and strip where good recovery is required. Resistant to ozone
Medium Grade Closed Cell Expanded Neoprene Sponge – Product Code CC10
Average density of 150/170Kgm3.
Specification ASTM D1056-00 2c2 b2c.
Temperature range: -20c – + 100c
Applications: Gasket and strip to make withstand weather, heat and oil.
Medium Grade Closed Cell Expanded E.P.D.M Sponge – Product code CC30
Average density of 96/160Kgm3
Specification ASTM D1056-00 2A2 B2C
Temperature range: -20c – +85c
Colour: Black or White
Applications: Gasket and strip to withstand weather, heat and ozone.
Expanded Cross Linked Closed Cell Polyethylene – Product Code CC80
Average density 30Kgm3
Temperature range: -80c – +80c
Colour: Black or White
Applications: Gasket and strip to withstand the weather.
Closed Cell NITRILE/PVC Sponge – Product Code CC70
Average density 55-70Kgm3
Specification BS476 Class ‘0’
Temperature range: -50c – +116c
Applications: Gaskets, rolls and strips that withstand heat and oil can also be used as a thermal insulator.
Flat Fluted Matting – Product Code CCS 15F1M
A hardwearing natural rubber with a wide fluted ribbed surface for slip resistance. Ideal for use around industrial workstations to provide a durable surface that also insulates against cold floors and noise.
– Choose either 3mm or 6mm thickness colour Black
SPECIFICATION
- Hardness Shore A+5 65c
- SG(g/cm2) 1.5
- Tensile (N/mm2) 2.5
Fine Fluted Matting – Product code CCS 15FIM
A hardwearing anti-slip matting with a multitude of industrial and commercial uses: protect overlays in walkways and corridors, behind counters and checkouts, kick plates, wall protection, transport flooring, roll up flooring for increment weather.
Choose either 3mm or 6mm thickness available in black.
SPECIFICATION – Available in electrically tested grades to BS 921
- Hardness Shore A+5 65c
- SG(g/cm2) 1.5
- Tensile (N/mm2) 2.5
